SL 5102415 TLC15FP DC Analog Throttle
Pure DC output; 0 to 24 V @ 0 to 15A - temperature controlled cooling fan control, over temperature, short circuit & over current protection - walk around or table top operation - easy to set up, easy to operate
Made in the USA
ANY scale - G, O, HO, N, or Z!
Shourt Line Direct Discount Price: $299.95 New
Click on down arrow below to add AC and DC power cables or add the SL 15 amp 24Volt DC power supply or add all items to your cart
Please Contact Us by clicking here to combine shipping or purchase and ship outside the USA
- Input voltage at 10 to 24 volts
- 32 amp output stage - conservatively rated at 15 amps continuous - 18 amp peak
- Temperature controlled fan speed with low noise fan
- Smooth speed control
- Pure DC output with 150 watt heat dissipation rating
- Up to 18 amps peak output current at full throttle
- Over temperature protection with output shutdown on over temperature
- Auto short circuit shut-down on short current or current over 18 amps cuts track output and turns off Power LED to notify user of short circuit condition. To reset; remove cause of short circuit, turn speed control full counter clockwise - power LED and track power be restored.
- LED power good status indicator (LED on when input power is good - unless short-circuit protection is tripped)
- LED blinking over temp shut-down indicator (over temp shut-down circuit blinks LED and cuts track power)
- Walk around or stationary use with reversible connector
The SL 5102415 TLC15FP Throttle uses an input of 10 to 24 volts AC or DC. Cooling is provided by a bushless speed controlled fan to match cooling requirements. Fan is off when your trains are stopped or running slow and increases as your use more power. Works with any scale trains and any input voltage from 10 to 24 volts. The throttle employs a 32 amp output stage but is conservatively rated at 15 amps continuous output. An 18 amp short-circuit protection shuts off the output and turns off the power LED and the output stays off until the fault is removed and speed dial is returned to zero and then set to desired speed. This unit is both a table-top and a hand held throttle.
The picture above shows the tabletop configuration with input/output connectors on top. The connectors can be placed on the bottom by removing the face-plate, rotating 180 degrees and replacing. In this configuration the unit is ideal for a palm held or walk around throttle with the input/output connectors coming out the bottom.
The SL 5102415 TLC15FP DC Analog Throttle features a large forward/reverse switch and a quick response throttle. Turning past slow will stop the power output and reset the over current protection circuit when tripped. Over temperature protection is included and the blinking LED indicator over temp when the output is shut-off due to over temperature.
Mfg: Made in the USA by ShourtLine.com
Input Voltage:12 to 24 Volts DC
Input Current: 15 amps continuous at 24 Volts
Output Voltage: 0 to maximum input voltage
Pure DC output: No PWM (Pulse Width Modulation) just pure DC voltage
Output Current: 15 amps continuous - over 18 amps trips over current protection and shuts off the output
Cooling: Provided by a low noise, voltage stabilized fan that is speed controlled by internal temperature circuit.
Dimensions: 5.6L" x 2.8W" x 1.9"H (2.6H with throttle knob height") Palm Size for optional walk around use.
Weight: 9.5 Oz.
Speed Control: Silky smooth rotation to set the output voltage from 0 to full with an off position switch at full stop that cuts voltage to zero and resets short ciruit protection when tripped.
Direction Control: Forward, Stop (track power is totally disconnect) and Reverse push button control rated at 16 amps for heavy duty use.
4 terminal block screw connector for 24 to 12 gauge wire
Two terminals are for DC input power. These are used to connect the throttle with a regulated pure DC supply like our new 15 amp 24 volt regulated switching power supply.
Two terminals are for Track output power. These are used to connect power to your track.
AC input and DC output cables: 5 foot grounded 18AWG AC power cable and 10 foot red and black 14 AWG power cable for connecting to our 15 amp power supply.
Regulated 15 amp 24 volt switching power supply: featuring over temperature, short circuit and over voltage protection with adjustable output voltage from a front panel adjustment.
Track power clamps: Easy to use quick connect clamps for sending power to your tracks
The two track output terminals provide adjustable continuous pure DC power to your G Scale or any other scale trains or other DC loads. (note 13 amp throttle is shown below) These are used to connect the throttle with a regulated pure DC supply like the SL-PS320-1-27Fp power supply by ShourtLine as shown below.
The other two terminals provide adjustable continuous pure DC power to your LGB trains or other DC loads. (note 13 amp throttle is shown above)
Easy to set up and easy to operate (note 13 amp throttle is shown above). Use our new 15 amp model switching power supply that matches the 15 amp capacity of the new SL 5102415 TLC15FP DC Analog Throttle.
The SL 5102415 TLC15FP DC Analog Throttle can easily operate the largest G scale loco consists with lighted cars!
Questions? Email info@ShourtLine.com by clicking here
Thanks for looking - Shourt Line by Soft Works Ltd.
copyright 2016 ShourtLine.com - Soft Works Ltd. all rights reserved