Products for Model Railroading
Any Gauge - G, O, HO, N, or Z

Trains, Sets & Accessories

• LGB G Gauge Trains and Starter Sets (click here)
• LGB G Scale Vehicles, Buildings and Accessories
• SL-CRCS-3R-Tent LGB Wilson Brothers Circus Scale 3 Ring Circus Tent
  

Lighting

• SL5V2L245C 3 Volt Dimmer Controlled Duel Light Kit for LGB Passenger Cars
• Scale Lights (click here) to visit our configurable lighting products.

Power Supplies - PFC enabled efficiency

• SL-PS800-3-28F Output: 800VA, 9 to 28 Volts at 32 Amps
  

  Output: 800 VA - 3 isolated outputs, 20, 6.25 & 6.25 amps, 24VDC (9-27VDC) Input: 95-132VAC or 180-264VAC - Auto ranging, 47-63Hz Certifications: UL and CE Notes: inc. connectors, short circuit, over voltage & over temp. Protection

• SL-PS320-1-27F Output: 320VA, 18.6 to 27.2 Volts at 13 Amps 3 Year Warty.
• SL-PS300-1-27Fp Output: 300VA, 17.8 to 27.2 Volts at 12.5 Amps
• SL-CB-6A 6 amp Circuit Breaker with LGB power cables
• SL-PS200-1-27F Output: 200VA, 18.4 to 27.4 Volts at 8.3 Amps

  Output: 300 VA - isolated output 8.5 amps, 24VDC (17.8 to 27.2 VDC) Input: 88 ~ 264VAC @ 47 ~ 63Hz, or 124 ~ 370VDC Certifications: UL and CE Notes: Auto fan speed, short circuit, over voltage & over temp. Protection

• SL-PS200-1-27 Output: 200VA, 18.4 to 27.4 Volts at 8.3 Amps
• SL-PS60-1-20 Output: 60VA, 20 Volts at 3 Amps
• SL-PS36-1-24 Output: 36VA, 24 Volts at 1.67 Amps

DC (analog) Train Throttles (pure DC)

• SL-TLC12F 12.5 Amp Linear Throttle + on demand fan
  

  Output: 150 VA - 12.5 amp continuous, 30 amp peak at 24VDC Input: 24VDC Mfg.: USA Notes: Brushless, Ball Bearing Auto Speed Fan, Emergency Stop, LED status display

  
  

Power Supply/Throttle Sets (Analog pure DC)

• SL-PS300-1-27F/TLC8Fp

Track & Loco Contacts, Magnets and LGB replacement products

• SL-TM-1705 Neodymium Track Magnet (replaces LGB 1705 )
  

  Automate your railroad with the Shourt Line SL-TM-1705 track magnets to activate horn/whistle and bell sounds or the reed inputs on Massoth decoders for special functions. Replacement for and functionally superior to LGB 1705 Track Magnets (no longer available)

• SL-TMU-1705 Under Tie Track Magnet - Invisible (replaces LGB 1705 )
  

  Easy 2 minute Install! Automate your railroad with the Shourt Line SL-TM-1705 track magnets to activate horn/whistle and bell sounds or the reed inputs on Massoth decoders for special functions. Replacement for and functionally superior to LGB 1705 Track Magnets (no longer available)

• SL-TC-17100 Track Contact 18 inch cable and terminal block (replaces LGB 1700 and 17100)
  

  Automate your railroad with these track contacts that activate by loco magnets and control your switches and signals. Replacement for and functionally identical to LGB 1700 & LGB 17100 Track Contacts (no longer available)

• SL-TC-17100-nt-xx Track Contact xx = length of cable in feet, nt = no terminal block
  

  Specify length in feet when ordering. Includes two diodes for EPL motor installations Functionally identical to LGB 1700 and LGB 17100. Specify length when ordering in feet. Use with LGB and Massoth Feedback modules, EPL motors or Shourt Line SL-24V-2SW-Ctrl Dual Latching Relay Controllers. Automate your railroad with these track contacts that activate by loco magnets.

• SL-TC2-17100-nt-xx Track Contact xx = length of cable in feet, nt = no terminal block
  

  Dual Sensor Track Contacts - Detects both Loco Direction and Location. Specify length in feet when ordering. Includes four(4) diodes for EPL motor installations. Functions as two (2) each LGB 1700 or LGB 17100 devices but comes with attached shielded three wire cable. Use with LGB and Massoth Feedback modules, EPL motors or Shourt Line SL-24V-2SW-Ctrl Dual Latching Relay Controllers. Automate your railroad with these track contacts that activate by loco magnets.

• SL-LMX-17010 Loco Magnet (replaces LGB 17010 and Massoth 8420102 Loco Magnets)

  Neodymium Rare Earth Magnets - Extreme Power- up to 2 inch sensor activation - Low Profile - weatherproof Automate your railroad with these loco magnets that activate track contacts (above) when a loco passes by. Control your switches and signals. Unique design provides up to 2X power for ultimate reliability and up to 2 inch sensor activation. Replacement for and functionally identical to LGB 17010 & Massoth 8420102 loco magnets

• SL-LM-17010 Loco Magnet (replaces LGB 17010 and Massoth 8420102 Loco Magnets)

  Neodymium Rare Earth Magnets - Water Proof - Low Profile Automate your railroad with these loco magnets that activate track contacts (above) when a loco passes by. Control your switches and signals. Replacement for and functionally identical but superior to LGB 17010 & Massoth 8420102 loco magnets

• SL-24V-2SW-Ctrl Dual Latching Relay Controller New Product - Make any relay a latching relay

  Works with any 24V relay and creates an electronic latching relay for train automation. This controller makes any 24V relay into a latching relay Use with Shourt Line SL-RLY-2P4T-5A or SL-RLY-2P2T-10A Relays for reversing loops, station stops or train automation

• SL-RLY-2P4T-5A-24VDC Relay and socket - use with SL-24V-2SW-Ctrl to make a latching relay
  

  Replaces LGB aux switch but has 2X the contacts - use two and one SL-24V-2SW-Ctrl to replace two LGB EPL motors and aux. switches with 4X the switch contacts at 1/2 the cost.. Use to create reversing loops, station stops or other train automation

• SL-RLY-2P2T-10A-24V Relay - High Current Switch - use with SL-24V-2SW-Ctrl to make a latching relay
  

  Replaces LGB aux switch but has 10 amp contacts for track or high current loads - use two and one SL-24V-2SW-Ctrl to replace two LGB EPL motors and aux. switches with 2X the amperage at 1/2 the cost.. Use to create reversing loops, station stops or other train automation

• SL-TS-17A-12 Euro Style 12 Position Terminal Strip - Easy to cut to any size

  For connecting stripped 22-18 wire. Use to convert a non terminal SL-TC-17100-nt to one with terminals. 3.7" x 0.7" x 0.6" high. 8mm terminal centers. M2.6 x 5 screw. DVE, CE. Flexible white (natural) Nylon 66 body, 94V2 rated for 110 degrees C. 450 Volts. All metal parts are completely recessed in the housing to prevent shorts. Each strip has 12 circuits, with a mounting hole between each circuit. Can be easily shortened with a knife or saw.

• MTS - DCC & Track Equipment
  Central Stations, Boosters, Throttles, Decoders & Sound Systems
  • Massoth Electronics - The maker of all LGB Electronics

    NMRA and LGB compatible Central Stations, Boosters, Decoders w/Sound, and accessories

  • Phoenix Sound Systems,Inc. - Digital Sound Boards, Speakers, Batteries and Accessories

    DC, DCC compatible sound products

Products

Contact Us &
How to Order