LGB 2085D Mallet Steam Locomotive, 0-6-6-0T Smoke and Lights

New - VERY Rare - Never Run - 2 motors, Directional Lights, Cab Light & Smoke Generator

Out of production - Made in Germany - Germany Engineered - Pre-Marklin

Everything you need in the box to set up and run a classic 06-6-0 Steam Locomotive on DC, MTS/MTX or DCC power.

The Prototypes:

South German Railway (SEG) 0-6-6-0T Mallet Tank Locomotive

This is a Mallet locomotive which have 4 dive cylinders with interconnected steam chests. The cylinders are lined by hinged steam pipes that are attached to the locomotive chassis to pass steam from the low to the high pressure cylinders, respectively mounted fore and aft. By this means the Mallet generates a great deal of power since the exhaust steam from the first cylinder group develops more pressure as it passed into the second cylinder group.

• Gauge: Meter (1000 mm)
• Wheel arrangement: 0-6-6-0T (C'C'-n4vt)
• Weight (loaded): 55.5 tons
• Power: 5585 hp
• Top speed 22 mph (35km/h)

Model Features:

Without a doubt the 2085 is one of the most beautiful and fascinating locomotives on the LGB roster. With its handsome lines, intriguing drive rod and valve gadgetry and articulating drive assemblies the Mallet is a joy to behold as it pulls long trains through switches and around curves The mode is can negotiate even the tight curves since both of the drive assemblies articulate. Each drive assembly has its own motor which makes the Mallet one of the most powerful locomotives.

• Weather-resistant construction
• Factory-installed smoke generator
• Opening cab doors on both sides of the loco
• Opening smoke box door and tender cover
• Three-way power control switch
• Protected gearbox with two seven-pole Bühler motors
• 6 powered wheels
• One traction tires
• Twelve power pickups
• Voltage stabilization circuit
• Automatic directional lanterns
• Power sockets on rear of the loco
• 5 Volt plug in bulbs for easy replacement
• Weight: 3400 g (7.75 lb)
• Length: 510 mm (20 inches)

Specifications:

Mfg: Made by LGB in Germany

Components: Designed for indoor or outdoor use

Photos:

New in box with all factory Packing, locomotive, an Engineer and a Fireman - NEW

LGB 21812 with all original parts, Engineer Figure, Fireman Figure factory installed in fully lighted cab, includes all original factory packing and box - NEW

This DR Locomotive will run without any maintenance for decades of flawless operation

Never run, highly detailed Mallet Steam Locomotive with control switch inside boiler door (shown open above) & 2 each seven-pole Bühler motors for maximum pulling power.

Runs on any G gauge (45mm) track and will even turn on 24 in radius turns (R1 curved track like in a starter set)

Cab is fully lighted with detailed instrumentation and controls (door is shown in the open position)

Working headlights and taillights provide light for the engineer with automatic directional control.

Authentic graphics and loco details

Working cab skylight shown open

The three working directional lights on rear and front of the loco are also voltage stabilized for bight operation on DC power at low speeds

Bottom view showing drive wheels and traction tire on left rear wheel

Last chance to own this LGB classic Mogul Steam Locomotive with smoke and lights - all aboard!

For indoor or outdoor use.

Optional equipment: (Items listed below do NOT come with this item but are available at our store)

• Add a Massoth DCC Motor/Sound decoder, Pulse Smoke Generator and DCC/MTS Wireless Starter Set for complete wireless control of the LGB 2085 above

• Massoth 8150001 eMOTION XLS Motor and Sound Decoder

  MTS/DCC engine decoders for digital control of trains

  eMOTION XLS Sound Decoder
  Powerful 3 Amp HiFi Sound Decoder with up to 6 sound channels and 13 function outputs. Usable for locomotives with up to two motors.
  
  

  Available at our store

  Click here for more product details and larger photos

  NEW VERSION V2.2 HARDWARE AND SOFTWARE COMES WITH;

  • XLS decoder V2.2 circuit board (shown above)
  • Massoth hi-performance speaker for selected loco
  • interface cable for LGB and Aristocraft DCC for selected loco
  • Pre-recorded digital sounds for selected loco

  AND INCLUDES THE FOLLOWING FEATURES:
  

  BREAK ON DC
  Breaking with a special polarized DC-Voltage
  

  VOLUME CONTROL OF EACH OPERATION SOUND TYPES
  These 4 operation sound types can be adjusted separately:

  • Initial start sequences
  • Standing sound sequences
  • Shut down sequences
  • Operation sound sequences

  LGB and SUSI Interfaces are integrated

  The new eMOTION XLS Sound Decoder is the up and coming standard of the exquisite garden model railroad sound decoders. The XLS features a powerful output stage for up to two motors (3 AMPS) as well as 1 AMP for sound, light, and other functions.
  

  Additionally, 11 function outputs including 3 light outputs and 4 contact inputs are available which makes this unit exceptionally versatile.

  The integrated sound power amplifier with 6 independent sound channels sets the standard in today's locomotive sound simulations. The audio power amplifier delivers 1 watt (sinus) at 8 ohms impedance. The eMOTION XLS Sound Decoder delivers optimum characteristics for analog and digital operation.
  
  Optimized Analog- and Digital operation guaranteed
  The XLS works in analog mode starting at the lowest voltage possible. The settings and functions of the decoder may be set with the DiMAX PC Module and may be used in analog mode. Thus sounds may be triggered in analog mode via reed contacts.
  
  NMRA DCC and LGB© MZS/MTS
  The eMOTION XLS is compatible to NMRA/DCC and works with all generations of the LGB MTS systems. State of the art DATAFLASH technology and the latest programming procedures enable the reloading of sounds and software directly via the track.
  
  ORIGINAL SOUND in digital quality
  The XLS is delivered with a HiFi loudspeaker (57 mm - depending on loco selected) with a metal cap and an interface cable for LGB and Aristocraft DCC. The unit may be installed wire by wire as well. Mounting material is provided.
  
  Technical Data Drive Decoder:
  - NMRA/DCC compatible
  - LGB© MTS I, II, and III compatible
  - best driving characteristics with analog op. (selectable)
  - 14, 28, and 128 Speed Steps
  - 256 internal speed steps
  - 10239 Locomotive Addresses
  - Automatic Detection of operating mode and speed steps setting
  - 3.0 Amps max. continuous output (drive stage)
  - 4.0 Amps max. maximum total output (inc. functions)
  - Adjustable Motor frequency
  - Load Control in digital and analog
  - Switching Speed (programmable)
  - Adjustable Motor driving curve
  
  Technical Data Sound Amplifier:
  - 6 independent sound channels
  - High end amplifier stage with 1 Watt output (sinus)
  - Loudspeaker connection with 8 Ohms impedance
  - Sound Storage Capacity up to 150 sec.
  
  Technical Data Function Outputs:
  - 3 Light outputs (front, rear, internal 0.3 Amps each)
  - 6 Function outputs (0.6 Amps each)
  - Programmable Special Functions
  - Suitable for Power Buffer connection
  - 1 Amp max output of all function outputs
  - Intelligent function mapping up to F16
  - Parallel and serial data processing (LGB© MTS Pulse Chain Control)
    and automatic detection (serial data processing disengageable)
  
  Size in Millimeters: 60 x 32 x 18 mm
  

  Price includes speaker, wiring, installation hardware, speaker and pre-recorded digital sounds for each specific Loco

• Massoth DCC/MTS Wireless Starter Set:

SComplete 12 Amp Wireless DCC set; SL-PS320-1-27F (13A) + the Wireless Massoth Starter Set; 1210Z central station, Navigator FM and receiver for ultimate wireless MTS/DCC Train Control.

Please visit our store for these items or click here

• Massoth Pulsed Smoke Generators

  8412301 Pulse Smoke Generator (High Output) 19Volt
  8412201 Pulse Smoke Generator (Standard Output) 19Volt
  8412201 Pulse Smoke Generator (Standard Output) 5Volt
  Made in Germany by Massoth Elektronik GMBH

  
  Massoth Pulse Smoke Generators include a smoke generator, heating element, all cables and instructions.

  Description:

  The Pulse Smoke Generator for retrofitting your Steam and Diesel Locomotives, cabooses or buildings. This smoke generator may be retrofitted in most of the steam locomotives on the market.

  For steam locomotives the smoke is synchronized by loco axle rotation via a Massoth 8242030 eMOTION Pulse Generator Set pulse generator or by a Massoth eMOTION Sound Decoders synch output. When used with a Massoth Sound Decoder the sound and steam chuffs are perfectly synchronized. Massoth sound decoders provide synch outputs when axle synch generators are not available.

  The 19 unit barely consumes 0.2 (0.5 with 5V) Amps and produces a remarkable amount of smoke.

  High performance pulsed smoke generator 19V

  The high performance pulsed smoke generator (19V) provides the programmable SUSI-Interface. The high performance heating element is already built-in.
  

  
  

  Manual:

  Massoth Pulsed Smoke Generator User Manual Click Here to view or download

  Features:

The synchronization pulse may be produced by a wheel pulse generator or by a eMOTION decoder (XL Motor Decoder or XLS Sound Decoder).

Large smoke fluid reservoir for extended run time

Guaranteed satisfaction





Pulse Smoke Generator on Shourt Line steam loco mounting board ready for installing into an LGB 2085 boiler.


This view shows the smoke generator being installed into an LGB 2085 using a the mounting board from a SL-2085-Kit XLS/Pulse Smoke Generator Kit availabel at our store.

Questions? Email info@ShourtLine.com by clicking here

Thanks for looking - Shourt Line by Soft Works Ltd.

copyright 2010 ShourtLine.com - Soft Works Ltd. all rights reserved