Massoth 8130701 DiMAX DRC 300 Wireless Omni Power DCC Controller

This new transceiver works with any power, without a central station, for both the operation and programming of your locos MTZ/MTS or DCC decoder any time, anywhere.

Micro size board fits in any DCC equipped loco and provides all the functions of a wireless central station

Price: $130.99 New Available May 2010.

Omni-Power: Rail, Battery,  or Live Steam Power - Wireless DCC Control
That’s right – wireless control any loco with your DiMAX Navigator – regardless if the power comes from the rail, a battery or live steam! Works with any DCC equipped loco. For life steam, add the Massoth 8FL decoder and control both RC servos in your life steam loco as well as lights and other features.

Omni-Control: Wireless control up to 8 locomotives simultaneously per DiMAX Navigator regardless of loco power source, track, battery or live steam. Central station NOT required.

Omni-Programming: Wireless programming of your decoder from the Navigator without any programming track or central station or PC interface.

No central station required: Your digital decoders are controlled by the DRC 300 which delivers all the functionality of a central station inside your loco! The DRC 300 is like a wireless micro size central station at a fraction of the cost that allows you to choose ANY source of power.

NEWS FLASH - The DRC 300 if for perfect for wireless control of your first railroad whether it is a circle of track indoors or a garden railway. It also provides a safe way to get started in DCC control regardless if you use track power or battery power. You can even control your live steam locos with the DRC 300. Whether you are beginning your 1st railroad or are a master model railroader, the DRC 300 is the only wireless solution with total flexibility, low cost, and full MTZ/MTS and NMRA DCC standards compatibility.

NEW TO G SCALE OR GRADEN RAILROADING? All you need is the DRC 300 in any DCC equipped loco, a Massoth wireless Navigator and any type of tack or battery power to have full DCC Control. The DRC 300 is both superior to and lower cost than dead end non-DCC based wireless systems that are non-standard, inflexible and not expandable.

NEW TO DCC? This is the only safe way to get started! You can choose battery power or any type of track power or both!

DO YOU USE BATTERY POWER? The DRC 300 gives you all the DCC functions with up to 1000 feet of bi-directional control and programming of your decoder anytime - anywhere.

DO YOU USE LIVE STEAM? The DRC 300 gives you full control of RC servos for throttle and Johnson Bar control plus all the DCC functions with up to 1000 feet of bi-directional control and programming of your RC servos endpoints or other settings, anytime - anywhere.

DO WANT TO RUN YOU LOCOS ON OTHERS LAYOUTS? The DRC 300 allows your loco to run anywhere.

DO WANT TO RUN ANY COMBINATION OF LIVE STEAM, BATTERY POWER OR TRACK POWER TRAINS? With the DRC 300 and 1 Massoth wireless Navigator you can run up to 8 locos of any type on any track with full DCC control without a central station, even configure and run consists.

Features:

• Low Cost
• Control up to 8 locomotives at the same time per each DiMAX Navigator.
• Use up to 8 Navigators at the same time for 64 loco control simultaneously
• No central station necessary !
• Up to 1000 ft range between your DRC 300 equipped loco and your Navigator
• Miniature size allows installation in the smallest locos
• Provides ALL the functions of a central station including:
  • Drive a locomotive, control the lights and the functions
  • Control switches and switch routes
  • Install and operate consists
  • Program CVs and read CVs
• Easy to install and use

What you need to get started:

• A DiMAX wireless Navigator (transmitter) with software 2.0 and up (older version
  may be updated).
• A locomotive with an NMRA compatible DCC decoder.
• A DRC 300 receiver.
• Any available power source to operate the DRC300, decoder and run your locos motor, lights and other functions. You can use regular batteries, rechargeable batteries, solar power or ANY track power

Specifications:

Item-Nr.: 8130701 - DiMAX DRC 300 US
Delivery status: 
Availability: May 2010

Applications:

• Wireless control of any DCC locomotive or any other type of DCC accessory when controlled by a Massoth Wireless Navigator
• Power by:
  • Onboard Battery
  • Any type of track power
  • Both Battery and Track Power so you loco battery charges while on any power track

Up to 1000’ range unobstructed areas. Central station NOT required.

For indoor or outdoor use.

Click here for an overview of the DRC 300

Questions? Email info@ShourtLine.com by clicking here

Thanks for looking - Shourt Line by Soft Works Ltd.

copyright 2010 Shourt Line - Soft Works Ltd. all rights reserved