LGB Compatible PURE POWER

SL-PS150-1-24 G Scale Regulated Power Supply > LGB 50111

24 Volts 6.5 Amps for DC (analog), MTS, or DCC train power

Front panel adjustable output voltage 19 to 28 volts

New in the factory box

Shourt Line Direct Price: $55.93 NEW

For questions or details on our professional sound and DCC conversion services
Call 310-622-4431 or email us at info@ShourtLine.com

Click here to view Technical Data sheet

Features:

Easy to use full feature regulated power supply with regulated pure DC power a superior power source and direct replacement for hard to find LGB 50111.

• High efficiency
  
• High reliability
  
• Silent Operation - No Fan required
• Protections:
  • Over-voltage
  • Over-current
  • Over-power
  • Short-circuit
    
• UL & CE certified
• Output reverse protection
  
• VAC input range selected by switch
  
• 100% full load burn-in test
  
• EMI/RFI: FCC Part 15J, Class A & CISPR 22 Class A
  
• DC adjust range
  
• Free air cooling convection
  
• LED Power on indication
  
• Mfg. Warranty: 3 years
  
• 199* 110* 50 mm
  
• Weight: 0.73kgs/

Matched power and voltage for these products:

The SL-PS150-1-24 works world wide - use any AC voltage or frequency in the world!

Works better than your LGB 50111 Transformer with any LGB MTS/MTZ DCC or DC (analog) controls including:

• DC (analog) throttles
  • PIKO 35002
  • LGB 51070
  • LGB 52120
  • LGB 52121
• MTS/DCC digital command control central stations and throttles
  • PIKO 35010 type V MTS/DCC Central Station (Parallel & Serial Control & Programming)
  • LGB 5005 type I Central Station
  • LGB 5005 type II Central Station
  • LGB 5006 type III Central Station
  • LGB 55090p MTS Extender - Booster

Works with LGB, PIKO, Digitrax, Aristo-Craft and all major brands of DC (analog) and DCC train control systems

Protect your train investment with PURE DC power and REGULATED VOLTAGE and AUTOMATIC SHORT CIRCUIT PROTECTION.

Photos:

Side panel AC range switch 115V / 230V adjustable

Adjustment of voltage output:

Voltage output is set to 24 volts at the factory and can be easily adjusted as desired

Adjust the voltage in seconds from 19 to 28 volts using the front panel adjustment

Optional AC 6 foot cable:

See our store for details

How to hookup and use with a DC (analog throttle): (items shown below, other than the power supply, are not included with power supply but shown for setup purposes - all items available at our store)

This power supply works with any LGB, PIKO or Shourt Line throttle for train control

LGB throttle shown above

PIKO 35002 DC Analog Indoor/outdoor G Throttle/Controller 5 Amps shown above

1) Connect the Power supply + and - terminals outputs to your throttle's power input terminals

Rear view: LGB throttle wiring

Animated View of power and track wiring for the PIKO 35002 DC Analog Indoor/outdoor G Throttle/Controller 5 Amps

Rear view: PIKO 35002 DC Analog Indoor/outdoor G Throttle/Controller 5 Amps showing how to wire track and power supply cables

2) Connect track to the throttle outputs

PIKO 35002 DC Analog Indoor/outdoor G Throttle/Controller 5 Amps protective throttle cover shown above

Complete wireless DC (analog) control kit: SL-PIKO-DDC-5-PS-Kit $649.95 includes the following items; PIKO 35002 DC Analog G Throttle/Controller 5 Amps $189.99,  PIKO Wireless Receiver (Transceiver) $149.99, PIKO Navigator bi-directional wireless throttle $311.99, SL-PS150-1-24 G Scale Regulated Power Supply $55.93 and DC and AC power cables (PIKO quick connect track clips show above are also available, see our store for details)

3) Connect AC power and run your trains

How to hookup and use with LGB MTS train control:

The SL-PS150-1-24 if a perfect fit to power LGB type I, II or III central stations and boosters, Digitrax DCC controllers or any other DCC systems with 5 to 8 amp outputs.

LGB 5006 type III central station & LGB 55015 MTS Universal Remote (parallel) shown in photos below - available at our store.

1) Connect the Power supply + and - terminals outputs to your central station's input terminals

2) Connect track to the central station outputs

3) Plug your choice of throttle into the central station

4) Connect AC power and run your trains

Connect a Massoth wireless navigator (shown above) or the New PIKO low priced DiMAX Navigator and a Massoth receiver or the NEW PIKO receiver for up to 1000 feet of wireless DCC control. PIKO and Massoth Navigator and receiver available at our store.

How to hookup and use with the NEW PIKO MTS/DCC system for wired or wireless control:

The SL-PS150-1-24 if a perfect fit to power the new PIKO MTS/DCC 5 amp central station and PIKO 5 amp boosters.

Gain complete MTS II, III (Serial and Parallel) as well as NRMR DCC control and programming with the new PIKO central station, PIKO Wireless Navigator and optional PIKO Wireless Receiver (shown below - available at our store.)

1) Connect the Power supply + and - terminals outputs to your central station's input terminals

2) Connect track to the central station outputs

3) Plug your choice of Massoth DiMAX Navigator or PIKO Navigator into the central station or use the New PIKO wireless Receiver shown below for wireless control and decoder programming.

Complete wireless DC (analog) control kit: SL-PIKO-DDC-5-PS-Kit $649.95 includes the following items; PIKO 35002 DC Analog G Throttle/Controller 5 Amps $189.99,  PIKO Wireless Receiver (Transceiver) $149.99, PIKO Navigator bi-directional wireless throttle $311.99, SL-PS150-1-24 G Scale Regulated Power Supply $55.93 and DC and AC power cables (PIKO quick connect track clips are also available). See our store for details

4) Connect AC power and run your trains

Full Protection for your trains and electronics for DC (analog) or MTS/DCC control and programming.

Questions? Email info@ShourtLine.com by clicking here

Thanks for looking - Shourt Line by Soft Works Ltd.

copyright 2011 ShourtLine.com - Soft Works Ltd. all rights reserved